Technical Specifications

IOTATOI_LogoElectrical information IOTATOI-Server:

 

Micro USB for 5VDC Power supply (max 100 mA) RJ45

Ethernet Jack for third party connection and control Can be supplied with internal or external antenna.

Operating temperature range 20-150 Degrees Farhenheit

RJ45 communication information:

Communication TCP/UDP/ICMP (Web browser on Server port 80) UDP communication to third party equipment Software Configurable IP addresses and ports. Can communicate with up to 128 IOTATOI-sensor nodes simultaneous. Recommended to have no more than 16 per network, due to bandwidth and response time.

Electrical information

Temperature/Humidity IOTATOI-Sensor: Micro USB for attachment of 5VDC power supply for battery charge/ >= 0.5A.

Internal Li-on 3.7 V 2000 mAh battery Battery life time is dependent on usage. E.g. 10 sec poll interval for Temperature sensor gives 14 day, increases in idle time will increase battery life.

Temperature measurement range -40°C ~ 125°C (+/-5% accurate)

Humidity measurement range 0 – 100% RH (+/-2% accurate)

Electrical information Accelerometer IOTATOI-Sensor: micro USB for attachment of 5VDC power supply for battery charge/ >= 0.5A Internal Li-on 3.7 V 2000 mAh battery Battery life varies by output usage

Operating in sleep mode, life time will be +1Mon. Operating temperature range 0degree/120degree Axis: X,Y,Z Acceleration range: ±2g, 4g, 8g, 16g (SW configurable, default 16g) Sensitivity: 256LSB/g, 128LSB/g, 64LSB/g, 32LSB/g (SW configurable, default 256LSB/g) Bandwidth: 6.25Hz ~ 3.2kHz (SW configurable, default 3.2kHz)

Electrical information I/O IOTATOI-Sensor: micro USB for attachment of 5VDC power supply for battery charge/ >= 0.5. Internal Li-on 3.7 V 2000 mAh battery

Battery life is dependent on usage. If the I/O unit is on touched operating in sleep mode, life time will be +1 month.

Operating temperature range 0degee/120degree Input: Optical isolated from the IOTATOI-Sensor circuit and must be supplied by external power source.

Power source max. 5VDC (100 mA) Output: Optical isolated from the IOTATOI-Sensor circuit and must be supplied by external power source and electronic for e.g. relay control which can be found in supplementary documentation.

Supply range 5VDC-12VDC, 100 mA.

Communication  Information: Range 100m Open Air/ 25m Congested Space(Environment Dependent, Antenna placement)

Radio data rate up to 250 kbps Radio frequency range 2400MHz to 2525MHz (100 Selectable channels. SW Variable)

Communication protocol between IOTATOI-server and IOTATOI-sensors is proprietary and can be changed on demand.

Dimension: LxWxH (6.2×6.7×3.6 cm)

Company Site